INTONACO ACRILICO is a finishing coating formed of special acrylic binders highly water repellant, very fine colored quartz sands resistant to light and quemical additives to improve the manufacturing and adherence.
The row materials used allow a good transpiration of the wall. The addition of anti-algue and anti-molds additives allow am excellent resistance to atmospheric agents and bacteria.
The product with 2.0 mm granulometry is called GRAFFIATO and allows to obtain a finishing surface of rustic effect.
| Speed transmission of steam (EN ISO 7783-2) | Category | Valore |
|---|---|---|
| Spread equivalent to the thickness of the air layer Sd/m | V2 | medium - value between ≥ 0.14 and < 1.4 |
| Water absorption (EN 1062-3) | Category | Valore |
|---|---|---|
| Spread equivalent to the thickness of the air layer Sd/m | W3 | low – value ≤ 0.1 kg / (m² * h^0.5) |
| Grip EN 1542 (test carried out in a time of 28 days mandatory technical) |
|---|
| All measured values must be at least 0.3 Mpa (mean value recorded 1.58 Mpa) |
| Durability (EN 13687-3) |
|---|
| All measured values must be at least 0.3 Mpa (valore medio registrato 2.34 Mpa) |
Tests done by: Laboratorio aut. dal Ministero Infrastrutture e Trasporti P.C.S. LL.PP.S.T.C. – Legge 5 nov. 1971 n. 1086 Dec. N° 56300 del 14/03/2007
Laboratorio aut. dal Ministero Infrastrutture e Trasporti P.C.S. LL.PP.S.T.C. – D.P.R. n° 380/01 art. 59 circ. n°349/99 sett. a), b) e c) Dec. n°53362 del 06/05/2005
Organismo Notificato n°1308 (DM 826149 del 22/03/2004 del Ministero delle Attività Produttive) ai sensi della Dir. 89/106/CEE, D.P.R. n° 246/1993, DM 156/2003
| Consumo | UdM | 0.6 mm (*) | 1.0 mm | 1.2 mm | 1.5 mm | 2.0 mm |
|---|---|---|---|---|---|---|
| over glues like T POLVERE e T PASTA | kg/m² | 2.5-2.7 | 1.5-1.7 | 2.0-2.2 | 2.3-2.5 | 2.8-3.0 |
| over thick base plasters | kg/m² | 3.0-3.2 | 1.8-2.0 | 2.3-2.5 | 2.5-2.7 | 3.0-3.2 |
(*) Application of 2 layers.
The finishing coating must be applied after at least 28 days from the bottom plaster application.
The surface needs to be completely clean. Grease, oil and wax spots must be removed.
Chalked or absorbing bases must be treated with an insulating base, our ISOEDIL-A slightly diluted a ratio of 1:5 with water.
We suggest to dilute ISOEDIL-A with LAVEDIL SQ when the surface to be coated presents absorbance diversities (doors and windows frames, etc.) or if you want to extend the working time.
To apply INTONACO ACRILICO the base plaster must be well finished.
In case of applying the coating over surfaces that are very smooth, not spongy and scarcely absorbant we suggest to apply a layer of Fondo Ruvido slightly diluted in 50% weight with water, instead of using the base ISOEDIL-A.
Lay the material on the surface with a spatula paying attention at distributing one even layer of material. Use a plastic spatula to make the finishing with circular movements.
To apply the product with 0.6 mm thin granulometry you need 2 layers of material. The second layer must be applied when the first one results to be completely dry.
25 Kg cans.
Colors: see the colors palette.
INTONACO ACRILICO must be used at the original status without adding other materials.
INTONACO ACRILICO is used as protective and decorative coating for external and internal spaces over lime – cement bases.
Avoid the preservation in very cold places. Preserve at temperatures higher than +5 °C and lower than +30 °C. If stocked in proper places lasts 1 year.
INTONACO ACRILICO is constantly and properly checked in our laboratories. The raw materials used are strictly selected and checked.
The reported data refer to laboratory tests: during practical applications in building sites these can be slightly modified according to the conditions of any installation. The person who works with the product must verify the expected suitability of use of the product, taking upon himself.
The company Colorificio Veneziano s.r.l. may carry out technical alterations on products without notice.
